Table of Contents
Advertisement
88
Contacts
To edit an entry in the contacts database:
Select the relevant tab at the top of the display.
1.
Scroll to the required name and select it.
2.
Tap the Title bar, or tap
3.
Scroll to a field that you want to edit and select it. Change or enter
4.
any new information.
Continue to select and edit. When finished, tap
5.
changes in the Contacts database.
To delete an entry in the contacts database:
Select the relevant tab at the top of the display.
1.
Scroll to the required name and select it.
2.
Tap
and select
3.
The Delete Confirmation view appears in the display.
Tap the
button to confirm that the entry is to be deleted.
4.
Yes
Otherwise, tap the
entry.
Note:
If the Global Delete Preference is set to Do not confirm
deletions then this confirmation view will not be displayed and the
entry will be deleted.
Electronic business cards
The Contents list provides a means by which you can send via
infrared a specific entry to another device and also receive an entry
that has been sent via infrared to you. The entry is inserted into the
Contacts database.
To send an entry in the contacts database via infrared to another
device:
Make sure your R380s infrared port faces the infrared port of the
1.
target device.
Tip!
Maximum recommended distance between infrared ports is
20 centimetres or 8 inches and they must also be at an angle of 30
degrees or less.
Select the relevant tab at the top of the display.
2.
Scroll to the required name and select it.
3.
Tap
and select
4.
The Infrared send progress view appears in the display. If during
5.
transmission you want to stop sending the entry, select
On completion, you will be returned to the entry you selected.
6.
and select
.
Delete
button to cancel the deletion of the selected
No
.
Infrared send
.
Edit
OK
to save your
Cancel
.
Advertisement
Table of Contents
