Ericsson R380s User Manual page 175

To add a certificate:
When you go to a site that requires a certificate, it is downloaded
1.
and the New Certificate view displays. The details of the
certificate appear.
To accept the certificate and store it in your phone, tap
2.
certificate with the same name is already held, a message will ask
if you wish to keep the original certificate or replace it.
To cancel the download, or reject the certificate when it has been
3.
downloaded tap
Service providers settings
A number of Service providers can be set up in your R380.If there is
only one Service provider available, then it is used as the default. If
there is more than one Service provider available, then you are
prompted upon connection, as to which service provider to connect
to.
To create a new service provider or change an existing service
providers settings:
Select
1.
Service providers
view. The Service providers view appears in the display.
Tap and select
2.
view appears in the display.
or
Select the service provider to be changed. A view with the name
of the service provider appears in the display.
To enter or change the name of the service provider, select
3.
and enter a name for the service provider.
To enter or change the telephone number of the network service
4.
provider, select
phone entry touch sensitive keypad that appears in the display.
To enter or change the network protocol, select
5.
and then select
To enter or change the user name required for network access,
6.
select
Username:
To enter or change the password required for network access,
7.
select
Password:
To enter or change the confirm password required for network
8.
access, select
chose in step 7).
.
from the list displayed in the Preferences
New service provider
and enter the new number using the
Tel. num ber:
or
ISDN Analogue
and enter a new user name.
and enter a new password.
Confirm password:
. The New service provider
Bearer capability:
.
and enter the new password (you
OK
. If a
Nam e:
Extras 175