Table of Contents
Advertisement
Turning on your R380s for the first time
After turning on your R380s for the first time, you are asked to select
your preferred language.
1.
2.
3.
With the flip closed there are a number of modes relating to different
circumstances. They are outlined as follows:
Standby mode
After you have turned on the R380s (and entered your PIN code), the
NETWORK
18-05-2000
R380s searches for a network.
12:00
When a network is found, the R380s beeps three times. The indicator
light on top of the R380s flashes green once every second and your
network operator's name (in most cases abbreviated) appears in the
display.
Note:
standby mode.
When in the 'Standby mode' you can make and receive calls, use the
Phone book to make a call, view e-mail and SMS messages, view the
current days events, appointments and to-dos and activate/deactivate
a limited number of settings.
Other modes
If the name of a network does not appear in the display it may be due
to one of the following reasons:
Emergency calls only
If '
Emergency
calls only
network but you are not allowed to use that network. However, in an
12:00
emergency, you can call the international emergency number 112 or
999 in the UK. Furthermore the light indicator on top of the R380s
does not flash.
Note:
you to make an emergency call.
To select a language:
Scroll with
Press
to confirm your selection.
Turn your R380s off and then on again to activate the language.
Flip closed
See "Troubleshooting" on page 189 if you do not reach
Emergency calls only
This service is network dependant, not all networks will allow
to find and highlight your choice.
' is displayed, you are within coverage of a
Getting Started
13
Advertisement
Table of Contents
