Table of Contents
Advertisement
Incoming calls
When you receive a call, the R380s rings. The "Incoming call:" view
displays who is calling and asks you if you want to "
To answer the call:
Tap
to answer the call. When the call is finished, tap
•
Yes
To reject the call:
Tap
. The call is rejected and a busy tone is sent to the caller.
•
No
To ignore the call:
Select
. The call notification continues and the telephone
•
Ignore
button appears in the toolbar until the call is timed-out.
Note:
A data call cannot be answered as a voice call. Data
information must be downloaded to a data compatible machine or
service. The "Incoming call:" view reflects this and displays data in
the message and asks you if you want to send a busy tone. Fax is not
supported and cannot be answered.
Muting the microphone
To temporarily disconnect the microphone during a call:
Tap and hold
•
microphone is re-connected.
To disconnect the microphone during a call:
Tap
and select
•
To re-connect the microphone during a call:
Tap
and select
•
On hold
On hold allows you to put a call that is in progress on hold.
To put a call on hold:
Tap the number of the call that is in progress and select
•
from the pop-up menu. Alternatively, you can tap
active call on hold. The On hold icon
To resume a call:
Tap the number of the call that is on hold and select
•
the pop-up menu. Alternatively, you can tap
held call.
Note:
If you tap
hold a 'Call on hold' message appears asking 'Retrieve held call?'. If
you do not select
automatically ended.
to mute the microphone. When released the
Mute microphone
Turn off m ute
to end an active call when there is a call on
or
within five seconds the call is
Yes
No
.
appears in the display.
to resume the conversation.
appears in the display.
"
Answer?
.
.
Hold call
to put the
from
Retrieve
to retrieve the
Phone
61
Advertisement
Table of Contents
