Automatically Set Up Service Provider And E-Mail - Ericsson R380s User Manual

Automatically set up service provider and e-mail

The easiest way to set up the R380s is automatically, through your
service provider. Check your service provider's web site for
information or telephone/e-mail their support desk and ask about
automatic remote configuration.
If remote configuration is possible, tell your service provider that you
require internet service provider and e-mail settings, they will send
you an auto configuration message for these by SMS.
To automatically set up service provider and e-mail:
When the auto configuration messages
1.
inbox, select it.
A brief text and operator message appears on the display with the
2.
message
Configure now?
. To perform the auto configuration later, select
Yes
Send an e-mail to test the new settings, see "Sending an e-mail for
3.
the first time" on page 138 for more details.
Warning! Never accept remote configuration messages if you are
not expecting them or are unsure where they have come from.
. To initiate the auto configuration, select
Auto Configuration
New ISP settings have been
received from Operator 1
Configure now?
Yes
Getting started with e-mail and WAP
appear in the R380s
.
No
No
133