Table of Contents
Advertisement
System requirements
Before you can connect your R380s, your computer should have:
Windows 95/98/2000 SP 1 /NT 4.0 (at least service pack 5.0)
•
installed.
A Pentium processor, 166 Mhz or above, including 50 MB of free
•
hard drive space and a CD-ROM drive.
Serial port capability set up for communication.
•
Note:
Communication speeds should be set up as follows: serial at
115200 baud.
A Personal Information Manager (PIM) is required to synchronise
•
your R380 data with your PC. The supported PIMs are:
Microsoft
•
®
Microsoft
•
®
Microsoft
•
®
Lotus Organizer
•
Lotus Notes
•
The other functions (e.g. backup and restore) do not
require the presence of a PIM on your PC.
Note:
Lotus Organizer version 5.0 is included on the CD-ROM,
should you require a PIM.
R380 Communications Suite installation
Before you can synchronize or back up the contents of your R380s,
you need to install the R380 Communications Suite on your
computer.
To install the R380 Communications Suite:
Note:
Choose to install without having your R380s connected.
Insert the CD into your computer's CD-ROM drive.
1.
Select the desired language and click
2.
Select
3.
Install R380 Com m unications Suite
Follow the on-screen instructions to install the R380
4.
Communications Suite.
The CD normally starts automatically. However, if it does not, run the
R380 Communications Suite setup file to install manually, e.g. if you
wish to install R380 Communications Suite from a networked CD-
ROM drive.
Outlook
.
®
Schedule+.
Exchange.
(version 4.1 and 5.0).
®
(version 4.6 and 5.0).
®
.
OK
.
R380 Communications Suite
181
Advertisement
Table of Contents
