Table of Contents
Advertisement
Handsfree equipment
Handsfree equipment settings allow you to select the way in which
your R380s handles handsfree speech and the mode in which the
R380s is answered when handsfree equipment is fitted.
To change the handsfree settings:
Tap
1.
Handsfree equipment
Handsfree equipment view appears in the display.
To turn auto answering of a call on or off, select
2.
and select
Norm al
– you have to answer calls as normal.
Norm al
– you can answer an incoming call by pressing any key,
Any key
except the
– an incoming call is answered automatically after one
Autom atic
ring signal.
To change the way in which your R380s can handle handsfree
3.
speech, select
– The R380s handles the call in semi-duplex mode. This
Basic
means you cannot speak at the same time as the person at the other
end of the line. Use this alternative only if Full handsfree does not
work properly.
– The R380s handles the call in full-duplex mode. This means
Full
the quality of speech is increased considerably and is much
clearer, since you do not have to wait until it is your turn to speak.
For Full handsfree to work properly, your phone adapts to the
sound environment around the handsfree equipment. This
adaptation might take a few calls. During this learning phase, the
person you are talking to might hear an echo of his or her own
voice (because the sound goes from the speaker into the
microphone again). However, this disappears as the other person
speaks. If the echo lasts longer than the first few calls, try Basic
handsfree instead.
Tip!
Set the handsfree type to 'Full' first. If speech quality is poor, set
to 'Basic' type instead.
OK
Tap
to implement and save the new settings. The display
4.
returns to the current expanded directory in the Telephony –
Settings view.
in the Telephony – Settings directory. The
,
or
Any key
Autom atic
key.
and select
Handsfree type
Answering m ode
.
or
.
Basic
Full
Phone
81
Advertisement
Table of Contents
