Table of Contents
Advertisement
Enter the number of the person you want to call and tap
2.
The split screen displays the active call
the conference call
Tap the number of the new call and select
3.
menu. The new call is put on hold and the conference is made
active.
or
Tap the conference and from the pop-up menu select
conference is made active and the new call is put on hold.
To end the new call and return to the conference:
Tap the number of the new call and select
•
menu. The new call ends.
To terminate a conference:
Select the conference by tapping the display anywhere in the
•
surrounding area of the individual members (not the members)
and select
Release
Office handsfree mode
Office handsfree mode can only be started during an active call.
Warning!
Office handsfree mode is a volume level above the
maximum phone volume and should not be used within an arm's
length of your ears. See "Safe and Efficient Use" on page 192 for
more information.
To start the office handsfree mode:
Make sure the R380s is away from your ear, at arm's length.
1.
Slide the volume slider upwards to the maximum volume setting.
2.
Slide upwards once more, a short beep indicates that office
handsfree can be activated.
In quick succession, slide the volume slider upwards twice more
3.
from the maximum setting to start the office handsfree mode, i.e.
two fast clicks. Two short beeps indicate that the handsfree mode
is activating.
To stop the office handsfree mode:
Slide the volume slider downwards to stop office handsfree mode
and return to maximum volume.
Note:
Office handsfree is automatically deactivated after a call.
on the lower screen.
from the pop-up menu. The conference ends.
on the top screen and
from the pop-up
Hold call
Retrieve
from the pop-up
Release
Phone
.
. The
65
Advertisement
Table of Contents
