Table of Contents
Advertisement
If you then drag the stylus back towards the line at which you started,
the lines that have just become highlighted, will become un-
highlighted as the stylus moves past them, i.e. stylus dragged back to
the top line.
Any lines dragged over, that were highlighted from a previous tap
and drag movement, will stay highlighted.
The desktop
On opening the flip, your R380s shows the equivalent or nearest
function that was immediately active with the flip closed. For
example, if a contact within the Phone book is displayed and the flip
is opened, then the contacts record within Contacts appears in the
display.
Note:
A desktop view is shown for functions that have no nearest
equivalent between flip closed and flip opened.
Phone
Call
The desktop can be divided into three graphical areas:
Program tabs, containing six function groups which are located
•
in the upper section of the screen.
Title bar, which indicates the active program in inverse video
•
and is located directly under the tab.
Program icons, which start the different functions available
•
within each program tab and are located in the lower section of the
screen.
Selection guidelines
This is a general guideline about how to work with any flip open task.
To select a specific function:
Take out the stylus from the holder on the battery.
1.
Open the flip.
2.
Select the desired program tab on the desktop.
3.
Program tabs
Call log
P rogram icons
Settings
Getting Started
15
Advertisement
Table of Contents
