Table of Contents
Advertisement
Incoming call
+465554567890
Ericsson John
Answer?
30
Flip Closed
Receiving and answering a call
When you receive a call, the R380s rings, the indicator light on the
top blinks green rapidly and the display shows
To answer a call:
Press
to answer the call.
1.
When the call is finished, press
2.
Rejecting a call
To reject a call:
Press
when the R380s rings. The call is rejected and a busy
•
tone is sent to the caller. All calls can be rejected in this way.
The display shows
this is supported by the caller's subscription. If
on, the call is diverted to the number you have specified. See
"Divert calls" on page 74.
Note:
A data call cannot be answered as a voice call. Data
information must be downloaded to a data compatible machine or
service. Such a call can, however, be rejected.
Fax calls
Fax calls are not supported, however they can be forwarded to
another number such as the office fax number, so it is important that
you set the fax divert calls setting. See "Divert calls" on page 74 for
more information.
Note:
Fax calls are not received by your R380s and no indication is
provided.
When a call is in progress
Changing the volume
During a call the volume can be adjusted with the use of the slider on
the side of the R380s. Slide up to increase the volume and down to
decrease the volume.
Muting the microphone
To disconnect the microphone during a call, press and hold down
. Release
Using the display notepad
During a call you can enter a phone number or DTMF tone in the
display from the keypad as if it were a notepad. When you have
finished the call, the number remains in the display. To call the
number press
. The caller hears a busy tone if
Busy tone sent
to resume the conversation.
.
A nswer?.
.
Divert when busy
is
Advertisement
Table of Contents
