Ericsson R380s User Manual page 168

168 Extras
To change the access security settings:
Select
1. One-tim e passcodes
System/Preferences/Messaging view. The One-time passcodes
view appears in the display.
One-time passcodes
Initialise RSA SecurID
Initialise SafeWord
If RSA SecurID or Safeword have previously been initialised,
then
Get serial number
Note: The initialisation information you receive from RSA Security
(RSA SecurID) and Secure Computing (Safeword) is confidential and
must be destroyed once you have entered the information into your
R380s.
To initialize or re-initialize the RSA SecurID:
Select
•
Initialise RSA SecurID
passcodes view.
If no previous initialisation has been performed, the Initialise RSA
SecurID view appears in the display. Select the
Activation licence:
the seed data in their respective sections, then tap
the entered values cannot be validated a warning message appears
stating which value was incorrect. Otherwise, an information view
appears informing you that "RSA SecurID has been successfully
initialised". Select
If initialisation has already been performed, a Re-Initialise
confirmation message appears stating that the "Current
initialisation data will be lost" and asking "Are you sure?". Select
if you want to retain the previous initialisation and return to the
No
One-time passcodes view. Otherwise, select
RSA SecurID view appears in the display. Change the
initialisation data as described above.
from the list displayed in the Extras/
will also be displayed.
from the list displayed in the One-time
sections and enter your user identification and
to return to the One-time passcodes view.
OK
and
User ID:
OK
. If any of
. The Initialise
Yes