Table of Contents
Advertisement
Note:
The passcode copied to the clipboard can be used, i.e.when in
the WAP browser, by selecting the Paste command.
Note:
Generate passcode is only valid if the setup of secure access
has been performed. If secure access setup has not been performed,
then you will see the message "To generate a password you must first
enter the access password settings". Select
Area information or SMS message notification
If you receive area information or a SMS message notification when
either the flip is opened or closed, the message immediately appears
in that view. If you then close the flip or open the flip (depending on
the current status), the area information or a SMS message
notification continues to be displayed in the subsequent view until
you have read the message.
Note:
SMS message notifications appear in a similar format to area
information messages, except the message header is 'Message'.
If the message text exceeds the display, use
and
(Flip open) to view the remaining text.
When you have read the message you can dismiss the message using
one of the following methods:
With the Flip open, select
•
With the Flip closed, press
•
If the message contains embedded links and is available in the Inbox
(if configured to be saved), then you can re-open the message in the
Flip open view and initiate a link by tapping the link with the stylus.
Note:
Short SMS messages are stored in the Inbox as SMS messages.
If area information has been configured to be stored, then it is also
stored in the Inbox.
OK
.
OK
or
.
(Flip closed) or
.
Messaging
113
Advertisement
Table of Contents
