Ericsson R380s User Manual page 36

36 Flip Closed
Scroll to and press
2. On
standby mode with 'Increasing ring' highlighted.
To deactivate increasing ring, repeat the above process and select
Divert calls
Call Diversion for all calls can be switched on or off. The current
status is initially highlighted when selected. The number to which
calls are diverted will depend on the call diversion criteria set with
the flip opened. See "Divert calls" on page 74.
To divert all calls:
From the
1.
Phone m enu
. A message appears in the display informing you that the
phone is accessing the network.
Scroll to and press
2. On
standby mode with 'Divert calls' highlighted.
To end diverting calls, repeat the above process and select
Infrared port
The infrared port is used for data communication via infrared with
compatible devices such as a PC or another R380s. When selecting
the infrared port, a message appears in the display indicating its
status.
To activate the infrared port:
From the
1. Phone m enu
. A message appears indicating the current status.
Press to activate the infrared port.
2.
The modem port deactivates automatically when it has not made
contact with another device for a period of one minute.
The infrared port deactivates automatically after 10 minutes if no
activity is detected.
Note: Maximum recommended distance between infrared ports is
20 centimetres or 8 inches and they must also be at an angle of 30
degrees or less.
Next incoming
If you have different numbers for voice and data calls, this is referred
to as multi numbering and means that you can have two phone
numbers in your network subscription. If you only have one number
for all call types, this is referred to as single numbering and means
that your SIM card does not support separate voice and data numbers,
i.e. your R380s does not recognize what kind of a call you are
receiving.
. The R380s remains in phone menu
, scroll to highlight
. The R380s remains in phone menu
, scroll to highlight
and press
Divert calls
.
Off
and press
Infrared port
.
Off