Table of Contents
Advertisement
146
Getting started with e-mail and WAP
Using WAP with several configurations installed
You can have several WAP profile configurations set up on your
R380s, for example one from your network operator and one from
your company. To access the service you want it is important to select
the correct WAP profile. This will ensure that the appropriate service
provider and gateway are used when dialling.
For example, a bookmark might only work with the same
combination of service provider and gateway that was in use when
the bookmark was initially saved, and this is why the WAP profile is
saved in the bookmark.
If you are having difficulty accessing a WAP site you might solve the
problem by changing the WAP profile that is in use. You can do this
by editing the sites bookmark, see page 129.
Locating settings in Windows 95 or 98
If you want to use your R380s with the same internet service provider
as your PC, the following table tells you where you can find the
necessary settings.
On the Windows desktop double-click My Computer, double-
1.
click Dial-Up Networking and click on the icon representing
the internet service provider to be set up on the R380s.
Name
Tel.
Number
Bearer
Capability
The name under the icon in Dial Up
Networking. The name can be changed to
something more memorable.
Right click on the icon and select Properties.
Look in the Area Code and Telephone Number
fields. Enter the number in to the R380s including
both area code and telephone number, preferably
in GSM international format. For example
Swedish area code 033 and telephone number 555
2525 may be entered to the R380s as 0335552525
(will work in Sweden only) or +46335552525
(works in Sweden and other countries)
If your PC uses a regular modem select Analogue.
If your PC uses ISDN and your network operator
supports it, select ISDN.
Advertisement
Table of Contents
