Table of Contents
Advertisement
Global settings
To change the system settings:
Select Global from the list displayed in the Preferences view. The
1.
Global view appears in the display.
Global
Backlight settings
Display settings
Input settings
Locale settings
Data connection settings
Miscellaneous settings
To change the backlight settings:
Select
1.
Backlight settings
The Backlight view appears in the display.
To change the mode of the backlight hand held or backlight hands
2.
free display, select
then select
Off
back light is illuminated if an event (i.e. an alert sound,
Autom atic -
message to be acknowledged, etc.), a key press, at power on or the
volume slider is pressed up and down or vice versa. The
illumination is turned off after 10 seconds of inactivity or 1 minute
if the volume slider was used.
OK
Tap
to implement and save the new settings. The display
3.
returns to the Global view.
To change the display settings:
Select
1.
Display settings
The Display view appears in the display.
To adjust the contrast, select
2.
scroll arrows to select the required contrast level: 1 corresponds to
the lightest contrast and 9 to the darkest. The default level is 5.
To change the screen orientation, select
3.
select
Open flip to left
To change the mode of the screen saver, select
4.
and then select
held:
turned off after two minutes of inactivity).
To change the mode of the screen blanker when Vehicle Hands
5.
Free (VHF) is used, select
or
Off
Autom atic
from the list displayed in the Global view.
Back light hand held:
,
or
On
Autom atic
from the list displayed in the Global view.
Contrast:
or
Open flip to right
or
Off
Autom atic
Screen saver hands free:
.
or
Back light hands free:
.
and use the left and right
Screen orientation:
.
(LCD and backlight (if on)
and
and then
Screen saver hand
and then select
Extras
161
Advertisement
Table of Contents
