Configure Gateway Units (Kx-Tda0480) - Panasonic KX-TDA0480 Installation Manual

4.9.1 Configure Gateway Units (KX-TDA0480)

The Maintenance Console Software display uses a set of tabbed folders to organise the unit
configuration process. Each of these folders contains fields in which configuration data are
entered.
The data to be entered should have already been identified and recorded on a Unit Setup
Worksheet for the unit being configured. Field definitions and parameter descriptions are
provided in Section 2.2 of this document.
Much of the data recorded during the unit configuration process is critical to the proper
operation of the equipment and care must be taken to avoid errors.
Each of the unit configuration tabs is discussed as follows.
Installation Manual
Logical Installation
83