Panasonic KX-TDA0480 Installation Manual page 69

Unit Setup Wizard 5 of 6
Use the Setup Wizard screen 5 to either accept the default User password or change the User
password.
The default User password is user typed in lower case characters. Be careful to make a record
of any new password that is entered at this time
1.
If the default password is to be used, click on the Use Default check box and proceed to
step 6.
2.
If the User password is to be changed, select the Password field and type the new password.
To enhance security, an * (asterisk) symbol will be echoed in place of each character typed.
WARNING
If a password is lost, it cannot be recovered. In the event of a lost password, contact your
maintenance staff, an service office, or an authorised agent.
3.
Select the Confirm password field and retype the new password. To enhance security, an
* (asterisk) symbol will again be echoed in place of each character typed.
4.
Click on the Next button when finished entering information or click on the Cancel button
to exit the Wizard and lose all changes.
If the new password is lost, contact the Customer Support.
*1
Installation Manual
.
*1
Logical Installation
69