Table of Contents
Advertisement
MAINTENANcE
Dc SpARk
bOX bATTERY
REplAcEMENT
1) Remove the faceplate by lifting it up off the
hinges on the sides of the firebox.
2) Remove the door frame overlay by swinging
out 45
from the bottom and lift up and out.
o
3) Remove the DC spark box bracket assembly
by lifting the bracket tab out from the firebox.
DC Spark Box Bracket Assembly
partially removed.
4) Remove the battery cover from the DC Spark
Box.
5) Remove the AA battery and replace with a
new one.
6) Reverse steps 4 to 1.
48
Dc SpARk bOX REplAcEMENT
1) Remove the faceplate by lifting it up off the
hinges on the sides of the firebox.
2) Remove the door frame overlay by swinging
out 45
from the bottom and lift up and out.
o
3) Disconnect the spark electrode wire from the
DC spark box shown in the image below.
Spark Electrode Wire
4) Remove the DC spark box bracket assembly
by lifting the bracket tab out from the firebox.
DC Spark Box Bracket Assembly
partially removed.
DC Spark Box Bracket Assembly
removed from firebox.
5) Disconnect the 2 DC spark generator wires
from the DC Spark box located just behind
the bracket tab as shown.
Generator Wires
6) Remove the 2 screws that secure the DC
spark box to the bracket.
DC Spark Box
7) Replace DC spark box and reverse steps.
Regency Gemfire™ Gas Fireplace
Advertisement
Table of Contents
