Table of Contents
Advertisement
GEMFIRE54
Warning: Turn off the unit by way of the wall switch or remote. Allow unit to cool at least 10 min. - prior to removing the faceplate.
1) Secure the left side mounting bracket to the backside of the fascia as
shown below. Use 3 screws supplied to secure the mounting bracket
in place. Repeat for left side.
NOTE: Ensure that the fascia is positioned correctly when installing
the mounting brackets to the fascia. There is a top and bottom, the
top fascia is all one piece - the bottom fascia is a single piece to be
installed once the top fascia is in place.
Top
Regency Gemfire™ Gas Fireplace
918-827a
FAcEplATE INSTAllATION
FASCIA INSTALLATION
2) Install the fascia to the unit by hooking the left and right side mounting
Right Side
Mounting Bracket
2
brackets into the mounting slots at the side of the fi rebox as shown
below. It is recommended that you use the fi rst mounting slot (the one
closest to the door frame overlay) out of the 5 so that the faceplate
and door frame overlay are fl ush with one another. See diagram
below.
NOTE: There are 5 mounting slots available, this is to accommodate
any fi nishing that protrudes slightly beyond the faceplate.
installation
First Mounting Slot
(recommended)
39
12/15/11
Advertisement
Table of Contents
