Amendment To "Defining Dialling Plans; Correction To "Checking The Base Mac Address - Gigaset C675 IP User Manual

Description of new and updated functions

Amendment to "Defining dialling plans"

Amendment to "Defining dialling plans"
This section amends the section "Web configurator – Defining dialling plans – Cost control" in the user
guide for your Gigaset VoIP phone.
When defining dialling plans, the additional option
£
( user guide for your phone, Web configurator page
¢
Dialling Plans).
Activate the option
all phone number(s) for which the the dialling plan is defined.
You can define the automatic area code on the Web page
¢
under
Dialling Plans
Please note
In the case of dialling plans for emergency numbers, you should always deactivate the
option
Use Area Codes.

Correction to "Checking the base MAC address"

This section replaces the section "Base settings – Automatic firmware update" in the user guide for
your Gigaset VoIP phone.
To display the base MAC address, press the following keys in sequence while the handset
is in idle status.
On the Gigaset S67H or S68H handset:
v N 5 O M 5
On the Gigaset C47H handset:
v 5 5 O M 5
¤
Press and hold the end call key a to return to idle status.
26
for all VoIP calls, if the automatic area code is to precede
Use Area Codes
Area Codes.
is now available
Use Area Codes
¢
Settings Telephony
¢
Settings Telephony