Assigning The Send/Receive Connection; Starting The Connection Assistant - Gigaset C610IP Manual

Assigning the send/receive connection

Once you have entered all the VoIP data fully and correctly, the message "Your IP account is regis-
tered with your provider." will appear in the display after a short time. The VoIP wizard is closed.
12

Starting the connection assistant

To call other parties using the newly configured VoIP connection (e.g. IP 1), you must assign the
connection to one or more of the registered handsets as a send connection.
Default assignment: The VoIP connection is assigned to every registered handset and to the inte-
grated answering machine as a receive connection (incoming calls can be received). It is not
assigned to any handset as a send connection.
The following is shown in the display:
a.
Connection Assist.
Assign connections -
No
b.
Rec. Connections
INT1
receives calls for
Fixed Line: 4560123
IP 1: 12345602
Gigaset.net: 12345#9
Change
?
to handset
INT1?
Yes
Ð
OK
>
Press the display key
the setting for the send and receive connec-
tions of the handset with the internal name
INT1.
>
Press the display key
change the setting for this handset.
The list of receive connections currently assigned is
displayed.
Press down on the control key
through the list if necessary.
>
Press the display key
change the receive connection setting.
>
Press the display key
change the setting. The following steps are
skipped. Continue from e.
§Yes§
if you wish to change
§No§
if you do not wish to
s
to scroll
§Change§
if you wish to
§OK§
if you do not wish to
13