Figure 64 - Lan (Dhcp) Setup Screen; Figure 65 - Lan (Adsl) Setup Screen - ADT A-SDR400LTE-80 User Manual

User's Manual
Figure 64 — LAN (DHCP) Setup screen.
Selecting ADSL (PPPoE) allows you to set up the ADSL network.
NOTE: The ADSL and modem cannot be configured at the same time. If the DVR is networked
via modem, the ADSL (PPPoE) will not be selected.
Figure 65 — LAN (ADSL) Setup screen.
Highlight the box beside ID and press button. A virtual keyboard appears allowing you to enter
the ID for ADSL connection.
Highlight the box beside Password and press button. A virtual keyboard appears allowing you
to enter the password for ADSL connection.
NOTE: Entering the ID and Password and highlighting OK reads the current IP Address of the
DVR configured by ADSL network.
NOTE: If the DVR is configured by DHCP or ADSL network, the IP address of the DVR might
change whenever the unit is turned on.
50