Motion Detector; Figure 34 - Motion Detector Setup Screen; Figure 35 - Motion Detection Zone Screen - ADT A-SDR400LTE-80 User Manual

Four-Channel Digital Video Recorder
The alarm terminal strip on the back of the DVR has inputs associated with each alarm. You can set
up each input on the Alarm In Setup screen. You can turn each input On (via Alarm I/O or
Camera Alarm) or Off. Each input can be given a title, and the inputs can be set as NO (normally
open) or NC (normally closed) independently.

Motion Detector

Figure 34 — Motion Detector setup screen.
Your DVR has built-in video motion detector. Video motion detector can be turned On or Off for
each camera.
Highlighting the box under the Sensitivity heading allows you to adjust the DVR's sensitivity to
motion. There are five settings with 1 being the least sensitive and 5 being the most sensitive.
You can define the area of the image where you want to detect motion; e.g., a doorway. Highlight
the icon under the Zone heading, and press the button. The Motion Detection Zone screen
will display.
Figure 35 — Motion Detection Zone screen.
25