Ptz Mode; Figure 74 - Live Monitoring (Text-In) Screen - ADT A-SDR400LTE-80 User Manual

User's Manual
The DVR can be set to display the event-detected video in full-screen on the monitor during the
preset dwell time when there is an Event. The video of the lowest camera number among cameras
associated with the event-detected sensor will be displayed, and the DVR will return to the previous
screen format after event monitoring dwell time. While the event monitoring is activated, the
monitoring for all other subsequent events will be ignored. Pressing the individual camera button
or the button during event monitoring releases the current event monitoring and
QUAD/SEQ
displays the selected camera or return to the previous screen format.
The DVR will display the text-in data if there is any text input during live monitoring. The text-in
information will display on the image.
NOTE: The text-in displays only in full screen.
Figure 74 — Live Monitoring (Text-In) screen.

PTZ Mode

The DVR will control cameras with Pan, Tilt and Zoom capabilities. Pressing the button
PTZ
enters the PTZ mode. You can control the camera using front panel control buttons or by setting up
presets. Press the arrow buttons to pan left and right, and tilt the camera up and down. Use
and to zoom in or zoom out. and can be used to
CAMERA 1 CAMERA 2 CAMERA 3 CAMERA 4
focus the image.
NOTE: When the DVR is in the PTZ mode, a white line will display around the image.
NOTE: You cannot enter the PTZ mode when the selected camera is Off, has lost or is set to
Covert.
Pressing the button in the PTZ mode displays the PTZ Menu screen.
MENU
60