Recording Audio; Playing Recorded Video; Arrow Buttons; Figure 79 - Playback (Text-In) Screen - ADT A-SDR400LTE-80 User Manual

Recording Audio

If the DVR was set up to record audio, it will record audio when video is recording.
NOTE: Make certain you comply with all local and federal laws and regulations when
recording audio.

Playing Recorded Video

Once video has been recorded, you can view it using the arrow buttons. When playing video for the
first time, the DVR will display the most recent image. When playing video subsequent times, the
DVR will start playing video from the last recalled image.
When playing video, the DVR will display the text-in data if there is any text input. The text-in
information will display on the image.
NOTE: The text-in displays only in the full screen.
NOTE: Make sure that Text-In should be turned On during OSD setup if you want to display
the text-in information on the playback image.
Figure 79 — Playback (Text-In) screen.

Arrow Buttons

: Pressing the left-arrow button plays video backward at high speed. Pressing the button again
toggles the playback speed from
respectively.
: Pressing the right-arrow button plays video forward at high speed. Pressing the button again
toggles the playback speed from
respectively.
: After selecting
ENTER/PAUSE
Four-Channel Digital Video Recorder
, and . The screen displays
, and . The screen displays
, press the up-arrow button to advance to the next image.
, and
, and
63