Figure 37 - Text-In (Generic Text) Setup Screen - ADT A-SDR400LTE-80 User Manual

Four-Channel Digital Video Recorder
NOTE: The following description is for a Generic Text device. The screen changes for
different types of text input devices, and there will be different parameter boxes for you to
enter information.
Figure 37 — Text-In (Generic Text) Setup screen.
Highlight the box beside Transaction Start, and press the
button. Use the virtual keyboard to
enter the Transaction Start string. Refer to the device manufacturer's documentation for the text
string that the device first sends when a transaction starts.
If you want the DVR to react to any character sent from the text input device, you will want to turn
On Any Character. Highlight Any Character, and press the
button to toggle between On and
Off.
NOTE: If Any Character is turned On, you will not be able to enter any text in the Start String
box.
Highlight the box beside Transaction End, and press the
button. Use the virtual keyboard to
enter the Transaction End string. Refer to the device manufacturer's documentation for the text
string that the device sends when a transaction ends.
Highlight the more line(s) box and press the button. Select the number of additional lines of
text that you want the DVR to record. You can choose from 0 to 10.
Highlight the box beside Line Delimiter, and press the button. Use the virtual keyboard to
enter the character(s) that the device uses to indicate the end of a line. Control characters can be
created using ^ and a capital letter; e.g., ^J for NL (New Line), ^M for CR (Carriage Return). Refer
to the device manufacturer's documentation for Line Delimiter character(s).
Highlight the box beside Ignore String, and press the button. Use the virtual keyboard to enter
the any strings of text that you want the DVR to ignore. Refer to the device manufacturer's
documentation for text strings that the device sends during transactions, so you will know which
ones you do not want recorded.
27