Chapter 3 - Configuration; Front Panel Controls; Camera Buttons (1 To 4); Enter/Pause Button - ADT A-SDR400LTE-80 User Manual

Chapter 3 — Configuration
NOTE: Your DVR should be completely installed before proceeding. Refer to Chapter 2 —
Installation.

Front Panel Controls

Many of the buttons on the front panel have multiple functions. The following describes each
button and control. Take a few minutes to review the descriptions. You will use these to initially
set up your DVR and for daily operations.
NOTE: A separate Alarm button is not provided. Pressing any keys on the front panel resets
alarm output including the internal buzzer when the alarm is activated. However, when you
are in the menu or PTZ mode, you have to exit the menu or PTZ mode first to reset alarm
output.

Camera Buttons (1 to 4)

Pressing the individual camera buttons will cause the selected camera to display full screen. They
are used to enter passwords. The camera buttons also function in the PTZ mode. Pressing
zooms in in the PTZ mode, and pressing
CAMERA 1
is used to control near focus of the PTZ camera in the PTZ mode.
CAMERA 3
control far focus of the PTZ camera in the PTZ mode.

Enter/Pause Button

This button selects a highlighted item or completes an entry that you have made. Pressing the
button in the live monitoring mode freezes the current live screen, and the screen
ENTER/PAUSE
displays . Press the button again to return to the live monitoring mode.
Figure 15 — DVR front panel.
CAMERA 2
Four-Channel Digital Video Recorder
zooms out in the PTZ mode.
is used to
CAMERA 4
9