Network Setup Screen; Figure 61 - Network Setup Screen - ADT A-SDR400LTE-80 User Manual

Network Setup Screen

In the Network Setup screen you can set up the DVR for LAN and modem connections.
Highlight the box beside Connection. Press the
Highlight the box beside Admin Password and press the
You will first be asked to enter the current password. Then you can enter a new password; you will
be asked to confirm the new password before it is accepted.
Highlight the box beside User Password and press the
You will first be asked to enter the current password. Then you can enter a new password; you will
be asked to confirm the new password before it is accepted.
NOTE: These passwords are for network use. They are different from the Admin and User
passwords for the DVR itself.
NOTE: The passwords are case sensitive. The factory default password for both
Administrator and User is 12345678.
CAUTION: Write the password down and keep it in a safe place. Once the
password has been reset, the default will no longer work. If the password is
forgotten, the unit must be reset using the Factory Reset Button and all data
settings will be lost.
The transfer speed indicates image rate transferred to each RAS. Highlight the box beside Transfer
Speed, press the button, and adjust the number.
You can program the image quality for transferring to the RAS (Remote Administration System).
Highlight the box beside Remote Quality and press the
selectable from High and Standard.
Figure 61 — Network Setup screen.
button to toggle between LAN and Modem.
Four-Channel Digital Video Recorder
button. A virtual keyboard appears.
button. A virtual keyboard appears.
button. The image quality can be
47