Figure 25 - Time Sync Screen - ADT A-SDR400LTE-80 User Manual

User's Manual
Highlight the Time Sync... box and press the
between the DVR and standard time servers that are available in most time zones and countries, or
between the DVR and another DVR.
Highlight the box beside Automatic Time Sync and press the
On and Off.
Highlight the box beside SNTP Server and press the
highlighting them and using the Up and Down arrow buttons to increase or decrease the number
value.
Highlight the box beside Interval and press the
from 30 to 300 minutes.
The box beside System Clock displays the DVR's time setting.
The box beside Server Clock displays the time setting of the time server. Highlighting the Update
button and pressing the button updates the server clock.
NOTE: The Server Clock will display " – " when the DVR cannot load the time information
from the time server.
The box beside Next Synchronization displays the time when the next synchronization is
scheduled. If you want to synchronize the time instantly, highlight the Now... button and press the
button.
CAUTION: When selecting Now..., any video with a later time and date will be lost if
the time and date of a time server is earlier than the last recorded image of the DVR.
NOTE: When the time difference between the DVR and the time server is more than one
minute, the DVR might not synchronize the time to prevent any unexpected loss of recorded
video data. If you want to synchronize the time manually, select Now....
18
button. You can set up time synchronization
Figure 25 — Time Sync screen.
button. Change the numbers by
button. Set the time interval for synchronization
button. This toggles between