Time-Lapse Recording Schedule; Figure 45 - Time-Lapse Recording Schedule Screen - ADT A-SDR400LTE-80 User Manual

User's Manual

Time-Lapse Recording Schedule

Figure 45 — Time-Lapse Recording Schedule screen.
You can program the DVR to record only during certain times based on time, day of the week, and
holidays. The smallest time segment you can use is 30 minutes. A blue rectangle indicates the
DVR is set to record during those 30 minutes. When there is no rectangle, the DVR will not record
during those 30 minutes.
There are several ways to set recording times:
• You can highlight an individual block and toggle it On or Off by pressing the
• You can change a 30-minute segment for all days by placing the cursor on the time line and
pressing the button to toggle the segment On or Off.
• You can change an entire day by placing the cursor on the day of the week and pressing the
button to toggle the day On or Off.
• You can change the entire calendar by placing the cursor in the upper left-hand box (above "S"
and to the left of the time line) and pressing the
Off.
NOTE: The Holiday (H) schedule applies to the dates you established as holidays when
setting Date/Time.
You can save your changes by highlighting OK and pressing the
the screen without saving the changes.
34
button to toggle the entire calendar On and
button . Selecting Cancel exits
button.