Aiphone IX-MV Setting Manual page 44

 For IPv6 Address with DHCP
 Create new data
Use flowchart to create new configuration, e.g., when installing a new system.
1. Verify managed DHCP environment exists and that each station has been assigned
a static IP address.
DUID of the station is "00030001 + MAC address."
2. Set "Language."
➤ P.95
"3. Language"
3. "New System."
"1.1. Create New System"
4. Configure using "Settings (Table View)."
Configure the station according to the description of each item. "System settings (Settings (Table
➤ P.107
View))"
5. Install all stations.
Note the MAC addresses of all the stations.
6. Associate the created setting data to each station.
"4.2. Association Settings"
The station is restarted and the IPv6 Address assigned by DHCP server beforehand will be assigned.
If a DHCP address cannot be assigned, it will default to "FDC2::7000."
7. Choose "IPv6" for the communication method of IX Support Tool.
"2.10. IX Support Tool Settings"
8. Upload the setting data to all the stations.
"1.5. Upload Settings To Station"
9. Set the clock of each station.
➤ P.113
"1.3. Time"
10.Set "LANGUAGE" of each Master Station.
Refer to IX Master Station Operation Manual.
11.Done.
Introduction
➤ P.81
➤ P.97
➤ P.93
➤ P.85
44