Aiphone IX-MV Setting Manual page 27

 To replace a station
Use flowchart to replace a station.
1. Configure DHCP server so that the new station installed inherits the IP Address
assigned to the replaced station.
2. Set "Language."
➤ P.95
"3. Language"
Can the setting data of the
station to be replaced be
3. Retrieve the setting data from the station to
be replaced.
"1.4. Download Settings From Station"
4. Replace the station.
Note the MAC address of the station to be replaced.
5. Replace the setting data.
"4.3. Station Replacement"
The station is restarted and the IP address assigned by
DHCP server will be assigned.
If a DHCP address cannot be assigned, it will default to
"192.168.1.160."
6. Set "LANGUAGE" of the replaced Master
Station.
Refer to IX Master Station Operation Manual.
7. Done.
Important Impo ant
Save the settings after configuring the system.
Refer to "Where the setting file is saved"
If the setting file is lost, station settings will need to be reconfigured.
Introduction
(For IPv4 Address with DHCP)
retrieved?
YES
➤ P.83
➤ P.99
NO
3. Replace the station.
Note the MAC address of the station to
be replaced.
4. Replace the setting data.
* If the settings are modified after being
restored, those changes will not be
reflected.
"4.3. Station Replacement"
The station is restarted and the IP address
assigned by DHCP server will be assigned.
If a DHCP address cannot be assigned,
it will default to "192.168.1.160."
5. Set "LANGUAGE" of the
replaced Master Station.
Refer to IX Master Station Operation Manual.
6. Done.
➤
P.82.
27
➤ P.99