Aiphone IX-MV Setting Manual page 119

2.1.3. Batch IP Address Configuration
Click
1)
2)
3)
How to perform Batch IP Address Configuration
1) Enter the start address that is to be automatically assigned to "IPv4 Address" or
"IPv6 Address."
2) For IPv4, enter "Subnet Mask."
• With the subnet mask, set the range for assignment. The network addresses in the range
and the broadcast addresses cannot be assigned.
3) Check of the station to which the IP address in "Station List" is to be automatically
assigned.
• To select or unselect stations in a batch, choose the station type and click
4) Click
• Click
5) Click , the Batch IP Addresses will be automatically assigned, and the subnet mask
will be entered.
• Click
System settings (Settings (Table View))
, the "Batch IP Address Configuration" window will be shown.
.
.
, to cancel automatic assignment.
, the screen will go back to "Batch IP Address Configuration" window.
4)
119
or