5.4.2. Ringtone Settings (Normal Call) (Master Station only)
Set the ringtone for an incoming call.
Set a different ringtone for each source.
Master Station list
How to configure the ringtone
1) Identify the Master Station to be configured using "Master Station list."
2) Identify the station to be registered in "Call source."
3) Click the cells that correspond to 1) and 2). As the pull-down menu appears, choose a
ringtone.
Call Patterns 1 through 6, Tremolo sound, Busy tone, On-hold tone, Operation sound, Error
sound, and Sound registered in "3.4. Custom Sound Registry"
4) When done, click
5) Click
.
Point
"Call Pattern 1" is the default setting.
System settings (Settings (Table View))
2)
1)
.
155
Call source
3)
➤ P.146