Aiphone IX-MV Setting Manual page 123

2.4.1. Batch Multicast Address Configuration
Click
1)
2)
3)
How to perform Batch Multicast Address Configuration
1) Enter the start multicast address that is to be automatically assigned to "IPv4" or "IPv6."
2) For IPv4, enter "Subnet Mask."
• With the subnet mask, set the range for assignment.
3) Check of the station to which the multicast address in "Station List" is to be automatically
assigned.
• To select or unselect stations in a batch, choose the station type and click
4) Click
• Click
5) Click , the multicast addresses will be automatically assigned.
• Click
System settings (Settings (Table View))
, the "Batch Multicast Address Configuration" window will be shown.
.
.
to terminate the automatic assignment.
, the screen goes back to "Batch Multicast Address Configuration" window.
4)
123
or