Aiphone IX-MV Setting Manual page 39

 To add a station
Use flowchart to add a station.
1. Set "Language."
➤ P.95
"3. Language"
2. Retrieve the setting data for all the stations.
"1.4. Download Settings From Station"
3. Add the setting data.
"System settings (Settings (Table View))"
First, add the station data to "1. Station Information"
4. Install the station to be added.
5. Choose "IPv4" for the communication method of IX Support Tool.
"2.10. IX Support Tool Settings"
6. Associate the setting data to the added station.
"4.2. Association Settings"
The station is restarted and IPv6 Address will be automatically configured.
If IP Address fails to be automatically configured, it will become "FDC2::7000." If this happens, cycle power to
the station, and then the IP Address will be automatically reconfigured.
7. Choose "IPv6" for the communication method of IX Support Tool.
"2.10. IX Support Tool Settings"
8. Upload the setting data to all the stations.
"1.5. Upload Settings To Station"
9. Set the clock of the added station.
➤ P.113
"1.3. Time"
10.Set "LANGUAGE" of the added Master Station.
Refer to IX Master Station Operation Manual.
11.Done.
Introduction
(For stateless IPv6 Address)
➤ P.83
➤ P.107
➤ P.93
➤ P.97
➤ P.93
➤ P.85
➤
P.108.
39