Aiphone IX-MV Setting Manual page 230

 Shared Group Settings
A group registered in the shared group settings will be applied to all Master Stations.
Settings Station
Selection pull-down
menu
1) Verify that the "Shared Group" table is shown.
If "Shared Group" is not visible, scroll the screen all the way to the left.
2) Enter the "Number" and "Group Name" of the group to be set in the Group Registry.
Number: 01 through 99 (2 digits)
Group Name: 1-24 alphanumeric characters
3) Identify the group to be configured in "Group Registry List" section (01 through 50).
4) Identify the stations to be registered to the group in "Station List."
5) Click the cells that correspond to 3) and 4). As the pull-down menu appears, choose blank,
"U," or "M."
Blank: Station will not be registered in the group.
U: Station will be registered in the group. When the group is paged, audio is transmitted as
unicast.
M: Station will be registered in the group. When the group is paged, audio is transmitted as
multicast.
6) When done, click
• When clicking
Master Station, and will be removed from the Shared Group section.
7) Click .
System Settings (Settings (Station View))
Station List Group Registry List
4)
.
, the data entered in the shared group will be registered to each
230
Setting Station Name:
Configure a group from the stations
shown.
2)
3)
5)
1)