How to configure Network Camera Event Setup
1) In "Master Station List," check
2) In "Network Camera List," check
event.
•
The network cameras registered in "Network Camera Registry"
3) Click
(Obtaining the events may take several minutes.)
•
Once events are successfully obtained, they will be shown in "Event List."
4) Check
the events shown in the "Event List."
5) Click
.
•
The network cameras and events registered in event registry will be shown.
Point
When clearing an "Event", click
System settings (Settings (Table View))
the station in which network camera event will be registered.
the network camera which will be monitored for any
.
, then the registered event will be deleted.
177
➤ P.138
will be shown.