Audio 1 RTP Start Port ♦
Description
Settings
Default values
Audio 1 RTP End Port ♦
Description
Settings
Default values
Audio 2 RTP Start Port ♦
Description
Settings
Default values
Audio 2 RTP End Port ♦
Description
Settings
Default values
2.6.1. Audio Buffer
Packets Buffered at Audio Start ♠
Description
Settings
Default values
Maximum Packets Buffered ♠
Description
Settings
Default values
System Settings (Settings (Station View))
Set the start port for the Audio 1 RTP communication range.
The (RTP End Port) should be greater than 210 digits from the (RTP Start Port). If a
smaller range is set, in some cases ports outside the range will still be used.
1-65534
20000
Set the end port for the Audio 1 RTP communication range.
The (RTP End Port) should be greater than 210 digits from the (RTP Start Port). If a
smaller range is set, in some cases ports outside the range will still be used.
1-65535
21000
Set the start port for the Audio 2 RTP communication range.
The (RTP End Port) should be greater than 10 digits from the (RTP Start Port). If a
smaller range is set, in some cases ports outside the range will still be used.
1-65534
22000
Set the end port for the Audio 2 RTP communication range.
The (RTP End Port) should be greater than 10 digits from the (RTP Start Port). If a
smaller range is set, in some cases ports outside the range will still be used.
1-65535
23000
Set the number of packets buffered until audio is started.
0-4
1
Set the maximum number of packets to be buffered.
When the system receives more packets, oldest packets are discarded.
Choose a figure greater than "
2-10
3
Packets Buffered at Audio Start."
217