Ricoh 917F Operating Instructions Manual page 1280

3. Using PostScript 3
Mac OS / Mac OS X
1. In the application, on the [File] menu, click [Print].
The [Print] dialog box appears.
2. Set the number of copies to two or more.
The sample print job is sent to the machine, and one set is printed.
3. In the pop-up menu, click [Job Log].
4. On the [Job Type:] pop-up menu, select [Sample Print].
3
5. In the [User ID:] box, enter a user ID using up to eight alphanumeric (a-z, A-Z, 0-9)
characters.
The user ID associates the user with his / her jobs.
6. Check the printed output to make sure the settings are correct.
If the settings are correct, perform the following steps to print the remaining sets.
If you want to delete a saved job, see Job Type.
7. On the machine's control panel, press the [Printer] key to display the printer screen.
8. Press [Prt.Jobs].
9. Select [Sample Print Jobs] using the [ ] or [ ] key, and then press [Job List].
A list of sample print files stored in the machine appears.
Depending on the security settings, certain print jobs may not be displayed.
You can print files also by pressing [User ID].
10. Select the file you want to print using the [ ] or [ ] key, and then press [Print].
A list of print files stored in the machine appears.
11. Press [Print] to change the number of sets to be printed.
12. Enter the new number of sets using the number keys, and then press [Print].
If you do not want to change the set quantity, perform the following steps.
You can enter up to 999 sets.
Press [Escape] key to correct any entry mistakes.
When multiple files are selected without setting a quantity, 1 page less than the minimum number of
all settings is applied.
• When printing finishes, the stored file is deleted.
• To cancel printing, press [Cancel]. Then, press [JobReset]. After it has started, the file is deleted.
• If there is a print job outstanding, this is printed before the sample print job.
68