Adjustment - Ricoh All in One Printer Operating Instructions Manual

Reference
p.94 "Nozzle Check Pattern"

Adjustment

This section explains [Head Position Adjust], [Registration], [Adjust Paper Feed], and
[Restore Defaults].
Head Position Adjust
If bidirectional printing produces misaligned verticals or blurred colours, print-
ing the test pattern will re-calibrate the machine. The test pattern differs depend-
ing on the resolution.
To check the print results of the test pattern, proceed to step G.
Important
❒ Make sure the envelope lever has been raised. Otherwise, you will be unable
to print.
❒ Check that A4L or 8
is not loaded, the test pattern is not printed.
❒ Perform no other operations while the test pattern is printing.
A
Press the {User Tools/Counter} key.
B
Select [Maintenance] using {U} or {T}, and then press the {OK} key.
" × 11"L paper is loaded in Tray 1. If this size of paper
1
/
2
AME001S
Maintenance
6
101