When A Message Is Displayed; When A Message Is Displayed On The Control Panel - Ricoh All in One Printer Operating Instructions Manual

Troubleshooting When Using the Scanner Function

When a Message is Displayed

This section explains likely causes of and possible solutions for error messages
that may appear on the machine's control panel.

When a Message is Displayed on the Control Panel

This section explains causes and remedies if an error message appears on the
display of the control panel.
Important
❒ If an error message that is not included in this section appears, turn off the
main power switch of the machine, and then turn it on again. For information
about how to turn off the main power switch, see About This Machine.
Message
5
Connection with
LDAP server has
failed. Check
the server sta-
tus.
LDAP server
auth. has
failed. Check
the settings.
Destination list
has been updat-
ed. Selected
destina-
tions/sender
will be cleared.
Updating desti-
nation list has
failed. Try
again?
Updating desti-
nation list. Re-
select
destination(s)
or sender's name
later.
62
Cause
A network error has occurred
and connection has failed. Try the
operation once more.
The user name and password dif-
fer from those set for LDAP Au-
thentication.
A specified destination or send-
er's name was cleared when the
destination list in the delivery
server was updated.
A network error has occurred.
The destination list is being up-
dated.
Solution
Try the operation once more. If
the message is still shown, the
network may be crowded. Check
the information of System Set-
tings. See "System Settings", Gen-
eral Settings Guide.
Make settings correctly for the
user name and the password for
LDAP server authentication.
Specify the destination or send-
er's name again.
Check whether the server is con-
nected.
If a destination or sender's name
was already selected, re-select it
after this message disappears.