Loading Paper Into The Tray 2 And 3 - Ricoh All in One Printer Operating Instructions Manual

Loading Paper into the Tray 2 and 3

This section explains how to load paper in Paper Trays 2 and 3.
A
Gently pull the paper tray all the way out.
B
Press the release lever and, without letting go of the lever, slide the end
fence.
C
Make sure the edges of the deck of paper are flush, and load the paper face
down.
Check that the top of the stack is not higher than the limit mark inside the tray.
D
Position the end fence flush against the paper.
E
Gently push the paper tray all the way in.
AMH003S
AMH007S
AMH011S
Loading Paper
6
73