Problem
The memory has already contained 80 files, so the BHT system
parameter file cannot be set up.
Solution
Press the C key to return to the SYSTEM MENU, then delete
unnecessary files in the memory. (Refer to Subsection 2.5.3, [ 7 ].
Problem
Uploading has failed.
Solution
To retry uploading, press the 1 key.
To return to the SYSTEM MENU, press the 2 key. Check the interface
port and communications parameters in the SET SYSTEM menu or
perform the communications test in the TEST menu. (Refer to
Subsection 2.5.3, [4.5] and [5.7].)
It is also necessary to check the communications parameters setup of
the host computer.
Problem
The file you attempted to upload is broken.
Solution
To upload the broken file as is, press the 1 key.
Chapter 2 Getting Started the BHT and System Mode
83