Denso BHT-8000 User Manual page 78

[4.6] Defining the functions of the shift key and magic keys
Defining the function of the shift key
Selecting the "6:KEY" on the SET SYSTEM menu calls up the screen
shown at left.
Highlighted is the current setting.
[1] SHIFT KEY: Switches to the shift key definition screen.
[2] M1 KEY:
[3] M2 KEY:
[4] M3 KEY:
[5] M4 KEY:
Select a desired screen by using the numerical keys or F5 and F6,
and then press the ENT key.
To return to the SET SYSTEM menu, press the C key.
Selecting the "1:SHIFT KEY" on the SET KEY menu calls up the
screen shown at left.
Highlighted is the current setting.
[1] Nonlock:
[2] Onetime:
Select a desired setting by using the numerical keys or F5 and F6,
and then press the ENT key. The screen returns to the SET KEY
menu.
Switches to the M1 key definition screen.
Switches to the M2 key definition screen.
Switches to the M3 (left-hand trigger switch) key
definition screen.
Switches to the M4 (right-hand trigger switch) key
definition screen.
Shifts the keypad only when the SF key is held
down.
Shifts only one key pressed immediately after the SF
key is pressed. (The following keys will not be
shifted.)
62