Denso BHT-8000 User Manual page 135

Problem
Downloading has failed.
Solution
To retry downloading, press the 1 key.
To return to the SYSTEM MENU, press the 2 key. Check the interface
port, communications parameters, and communications protocol in
the SET SYSTEM menu or perform the communications test in the
TEST menu. (Refer to Chapter 2, Subsection 2.5.3, [4.5] and [5.7].)
It is also necessary to check the communications parameters setup of
the host computer.
During uploading of a program file, data file, BHT
system parameter file, or system message file
Problem
The file you attempted to upload is damaged.
Solution
To upload the damaged file as is, press the 1 key.
Problem
The memory is insufficient for setting up the BHT system parameter
file or system message file to be uploaded.
Solution
Press the C key to return to the SYSTEM MENU and delete
unnecessary files. (Refer to Chapter 2, Subsection 2.5.3, [ 7 ].)
Problem
The memory has already contained 80 files, so the BHT system
parameter file or system message file cannot be set up.
Solution
Press the C key to return to the SYSTEM MENU and delete
unnecessary files. (Refer to Chapter 2, Subsection 2.5.3, [ 7 ].)
119
Chapter 4 Error Messages