[5.6] File test
If a defective file is found, delete it or overwrite it with the same name file.
Even defective, the file can be uploaded on the UPLOAD menu. It is, therefore, recommended that
important files be uploaded before deleted.
Selecting "6:FILE" on the TEST menu calls up the screen shown at
left.
If any of the files stored in the memories is defective, an asterisk (*) or
plus sign (+) will be prefixed to the name of the defective file(s). For
details about the (*) and (+), refer to Subsection 2.3.6, "[ 3 ] About
"$$BRKLST.SYS."
Selecting a particular file on this screen will show the file size and the
test result.
To select a file, use the F5 and F6 keys to move the cursor to the
desired file. If there are more than four files, the screen will scroll.
Highlighted is the currently selected file.
Press the C key to return to the TEST menu.
If you select a file on this screen by using the F5 and F6, the file size
and the test result will appear. If there are more than four files, the
screen will scroll.
Highlighted is the currently selected file.
Press the C key to return to the TEST menu.
The file name, file size, and test result (OK or NG) appear as shown at
left.
Press the C key to return to the file selection screen.
Chapter 2 Getting Started the BHT and System Mode
71