5.5.2 Rechargeable Battery Cartridge Alone
The CU-8001/8021 can charge Ni-MH battery cartridges all by themselves in either of the following two
ways:
- Fully discharging and then charging ("Refreshing)* [ 1 ]
- Charging only
To select [ 1 ], first turn on the CU-8001/8021 and then load a rechargeable battery cartridge into it. To
select [ 2 ], first load a rechargeable battery cartridge into the CU-8001/8021 and then turn on the
CU-8001/8021.
* Fully discharging and then charging battery cartridges
ï Never use the CU-8001/8021 for charging anything other than
the specified battery cartridges.
Doing so could cause heat, battery-rupture, or fire.
Handling the battery cartridge
ï Never charge a wet or damp Ni-MH battery cartridge.
Doing so could cause the batteries to break, generate heat,
rupture, or burn.
ï Do not insert or drop foreign materials such as metals or
anything inflammable into the CU-8000 through the openings
(vents or battery cartridge slot).
Doing so could result in a fire or electrical shock.
Chapter 5 Handling the CU-8000 (Option)
[ 2 ]
can eliminate "Memory Accumulation" as described on
page 129.
131