Denso BHT-8000 User Manual page 105

Problem
The memory has already contained 80 files, so the BHT system
message file cannot be set up.
Solution
Press the C key to return to the SYSTEM MENU, then delete
unnecessary files in the memory. (Refer to Subsection 2.5.3, [ 7 ].
Problem
Uploading has failed.
Solution
To retry uploading, press the 1 key.
To return to the SYSTEM MENU, press the 2 key. Check the interface
port and communications parameters in the SET SYSTEM menu or
perform the communications test in the TEST menu. (Refer to
Subsection 2.5.3, [4.5] and [5.7].)
Problem
The file you attempted to upload is broken.
Solution
To upload the broken file as is, press the 1 key.
Chapter 2 Getting Started the BHT and System Mode
89