Denso BHT-8000 User Manual page 41

Chapter 2 Getting Started the BHT and System Mode
Switching the beeper & vibrator
You may choose any of three waysó beeping only, vibrating only, or beeping & vibrating as a confirmation of
completion of code reading.
(1) Use the F5 or F6 key to select the BEEPER VIBRATION line that will be highlighted in any one of the
following three states:
(2) Highlight the desired way(s) by using the F7 or F8 key.
Adjusting the beeper volume
You can adjust the beeper volume to four levels from OFF to MAX.
(1) Use the F5 and F6 keys to select the BEEPER VOLUME line.
(2) To turn down the volume, press the F7 key; to turn it up, press the F8 key.
After making the above setting, press the ENT key or no key for five seconds. The new setting will be
fixed and the above screen will disappear.
25